The Bumper acts as a protective automobile part made of metal, aluminium, rubber, or plastic and absorbs the impact of automobile collisions. The hood, trunk, grill, gasoline, exhaust, and cooling systems are all protected by the bumpers.

All vehicle HUB ASSY available in good & premium quality.We at Keco Auto Industries export and import a variety of Automobile 

The fuel injector is installed at the intake manifold injection before the inlet valve.

“A head gasket serves as a seal between the engine block and cylinder head, preventing engine fluid leaks and pressure losses.”

Head Gasket prevents liquids and gases from escaping into adjacent cylinders and the surrounding oil and coolant galleries.The purpose is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinders.

The headlight is an important part of an automobile, and without it you could only drive at night where there are lots of street lights.

The idler arm provides for swivel movement and resists up and down movement. This resistance is vital in maintaining a vehicle's toe setting. 

Control arms are part of the suspension system. They attach suspension members to the chassis and manage the motion of the wheels.

Plastic Scorpio S10 Headlight Projector With LED ; Lighting Type. Projector with LED ; Body Material. Plastic ; Suitable For. Scorpio S10 

An ignition coil is used in the ignition system of a spark-ignition engine to transform the battery voltage to the much higher voltages required to operate the spark plug(s). The spark plugs then use this burst of high-voltage electricity to ignite the air-fuel mixture.

Oil Filters Eliminate contaminants that accumulate in the lubricating oil whilst the engine is running normally to ensure that the moving parts are not affected ...

The steering rack acts as the heart of your cars steering system, working with the pinion gear to allow for smooth, precise turning of the vehicle.

• ^{The car at the back of a vehicle which protects it if it bumps into something} 

Ball joints are small steel balls coated in a lubricated metal housing. The ball joints are important components in your vehicles suspension system and need to be in good condition.

Tail Lights are placed at the rear of the four-wheeler vehicles above the bumper. Moreover, these lights are red in colour as well as there are additional white lights near them. The white light indicates that the vehicle is in reverse gear.

The Fuel Tank Cap serves as the opening/closing point of a fuel tank that has air vents for optimum air pressure maintenance in the tank.

A throttle body is a butterfly valve located between the air intake filter and the intake manifold. It regulates how much air can go into the engine, based on driver input through the gas pedal. As more air flows into the engine, it injects more fuel, thus allowing for more power.

To check the steering box, you need to raise the front of the car but keep its weight on the wheels, and then get underneath it while someone else turns the wheels slightly. To do this safely, you can drive onto a set of ramps, but they must be resting on a level surface, directly under the wheels.

We make cap for Def Urea Adblue Aus-32 Diesel Exhaust Fluid tank so that your product should be safe .We use the best lock so that it has long life and safty.

50Hz 24v Dc Mahindra XUV500 Type 3 Car Headlight ; Frame Material. Plastic ;